BRUSHLESS SERVO MOTOR INSTRUCTION
1. THE STARTING SEWING SETUP
Motor manufactured speed
is “S.6”. If you want to reset the starting sewing speed, press the “▼” button for several seconds, when LED is
“S.0”, press the “▲” button with 1 times. When LED is “S.1”, then press the “▼”
button again, when LED shows “L.X” (X means 0---9: 0 means the quickest speed,
and 9 means the lowest), Press "▲" or "▼" key to adjust .5
seconds later, the set pattern will be automatically saved;
2. MOTOR ROTATING
DIRECTION
Motor default settings
is the reverse direction. If you need to reset: when motor stops, press the
"▼" button, LED shows "r.E" or "r.P". If you want
to change the direction, Press “▲” or “▼” key to switch between E and P (E
means reversed direction, P means normal direction normal direction.) to meet
the requirements of sewing machine. 5 seconds later, the set pattern will be automatically
saved;
3. The Maximum Speed
Setup
Motor manufactured limit
speed is 4500rmp/min. If you want to reset the speed, when motor stops press
the “▼” button for several seconds, when LED is “S.0”, press the “▲” button with 3 times; when LED is “S.3”,
then press the “▼” button again, LED shows the current set speed. You could set
the maximum speed by pressing “▲” or “▼” key (the speed change is based on 100r
separated). 5 seconds later, the set pattern will be automatically saved;
4. Stepless Change Speed
Motor is running, step
the footplate, the motor make stepless change speed by the different footplate
strenght in the range of the maximum working speed. Release the footplate, and
motor stops instantly.
5. Needle Position Setup
(TN-422B)
When motor stops, press
the “▲” button, LED shows “P.u”, it shows that when motor stops, it is needle
up. Press the “▼” button, LED shows the “P.d”, it shows that when the motor
stops, it is needle down. (if needed, you could contrary step the footplate
after the motor stops, the needle head will be back to the opposite position
instantly.)